User manual

Basic instructions for use

888

999

101010

111111

121212

777

Adjusting the interocular distance and the eyecups:

Adjusting the interocular distance:

To adjust an individual interocular distance turn the two halves of the binoculars via the centre

axis until you can see a round image.

To ensure optimum visibility through your STEINERS, the eyecups may be set to different

positions:

Adjusting the eyecups (models with ErgoFlex and ergonomic eyecups):

ergonomic

777

, cylindrical

888

or for persons wearing glasses

999

Adjusting the eyecups (models with cylindrical eyecups):

cylindrical

888

or for persons wearing glasses

999

Adjusting the eyecups (models with twist-up eyecups):

ergonomic

777

, cylindrical

888

or for persons wearing glasses

999

Focussing:

Porro binoculars with Sports-Auto-Focus (see also key):

Adjust both dioptre settings to “0” and everything from approx. 20m and beyond is always sharp

and clear. If this is not the case, one or both eyes may be ametropic. This has to be adjusted.

1. Choose a very detailed and remote object (approx. 200m distant).

2. Cover the left objective with your hand or the objective protection cover and look through

the binoculars.

3. Now turn the dioptre setting on the right ocular until you can see an entirely sharp and clear

image with your right eye.

4. Please repeat the same steps for the left eye. Now everything from 20m and beyond is

always sharp and clear.