Specifications

5-EN
WARNING
CAUTION!
This TV mount must be securely attached to the wall. If the mount
is not properly installed it may fall, resulting in possible injury and/or
damage.
Tools
Required
 3/16“ Drill Bit
 Screwdriver
 ½“ Masonry Bit
 Stud Finder
 Wrench or Socket Set
 Carpenter‘s Level
Note: The mounting components and hardware supplied in this package are not
designed for installations to ceilings with steel studs. If the hardware you need for
your installation is not included, please consult your local hardware store for proper
mounting hardware for the application.
Step 1A Mounting the Monitor Brackets to a TV with Flat Back
First of all, make sure the diameter of the Bolt (d, e, f, g) your TV requires. Once you have
determined the correct diameter, please see the relative diagram as below. You will thread
the Bolt into the TV using the correct Lock Washer (l, m, n, o) and Washer (r, s). Please
make sure the Monitor Brackets (b, c) are vertically centered and levelled with each other.
M4 Diameter Bolt M6 Diameter Bolt
Diagram 1A
M5 Diameter Bolt M8 Diameter Bolt