Specifications

6-EN
Step 1B Mounting the Monitor Brackets to a TV with Curved Back
First of all, make sure the diameter of the Bolt (h, i, j, k) your TV requires. Once you have
determined the correct diameter, please see the relative diagram as below. You will thread
the Bolt into the TV using the correct Lock Washer (l, m, n, o), Washer (r, s) and spacer
(p, q). For the M4 or M5 diameter bolt, you will need another M4/M5 Washer between the
Monitor Bracket and the Spacer. Please make sure the Monitor Brackets are vertically
centered and level with each other.
Step 2 Mounting the Wall Plate to the Wall
Brick, Solid Concrete and Concrete Block mounting:
Use the Wall Plate (a) as a template to mark 4 hole locations on the wall. Make sure these
holes are level. Pre-Drill these holes with a 1/2” masonry bit to at least 2.5” in depth. Insert
a Concrete Anchor (v) into each of these holes. Make sure the anchor is seated completely
fl ush with the concrete surface even if there is a layer of drywall or other material in front.
Attach the Wall Plate to the wall using 4pcs Lag Bolts (t) and 4pcs Lag Bolt Washers (u),
shown in Diagram 2A.
M4 Diameter Bolt M6 Diameter Bolt
Diagram 1B
M5 Diameter Bolt M8 Diameter Bolt