Specifications

7-EN

Wood Stud mounting:

The Wall Plate (a) must be mounted to two wood studs at least 16” apart. Use a stud

ﬁ nder to locate two adjacent studs. It is a good idea to verify where the studs are located

with an awl or thin nail shown in Diagram 2B. Pre-drill a 2.5” deep hole at the desired

height in each stud using a 3/16” drill bit. Make sure these holes are in the center area of

the studs and level with each other. Attach the Wall Plate to the wall using the 2pcs Lag

Bolts (t) and 2pcs Lag Bolt Washers (u).

Diagram 2A Diagram 2B

Stud Finder

16 inch

Step 3 Attaching Monitor to Wall Plate

Warning: Some TVs may require two people to lift! We are not responsible for

personal injury or product damage.

First hook the Monitor Brackets (b, c) over the top of the wall Plate (a), then let the bottom

of the Monitor Brackets rotated to the wall as shown in the Diagram 3A. Finally push the

each metal piece on the arms up and fasten the screws by screw driver, the ﬁ nishing

looking as shown in the Diagram 3B.

Diagram 3A Diagram 3B

wall

Lock

system

Thanks for choosing our products, enjoy the using!