Instructions / Assembly

ManualsBrandsStelpro ManualsBaseboard & FloorBella 84-13/16 in. 1200-Watt 240-Volt High End Residential Electric Baseboard in White

INSABA1116

2 5/16"

59mm

1 11/16"

43mm

X:\01_PRODUITS\FAMILLES\BA\DOCUMENTATION\BA_CATALOGUE

B. SENAY

2014-12-05 / bsenay

2014-01-17

2 / 5

3rd ANGLE PROJECTION

3e ANGLE DE PROJECTION

ALUMINIUM BASEBOARD

DESCRIPTION:

CRÉÉ PAR | CREATED BY:

CRÉÉ LE | CREATED ON:

# PIÈCE | PART #:

FORMAT | SIZE:

FEUILLE | SHEET:

XX.X° = ±0.5°

XX° = ±1°

.XXX = ±.015" [ ±.38mm]

CONSENT OF STELPRO DESIGN.

MIS À JOUR | UPDATED:

EMPLACEMENT:

TOLÉRANCES SI NON-SPÉCIFIÉES | TOLERANCES IF NOT SPECIFIED

LINÉAIRE | LINEAR: ANGULAIRE | ANGULAR:

.XX = ±.03" [ ±.76mm]

L'INFORMATION CONTENUE DANS CE DOCUMENT EST

LA PROPRIÉTÉ DE STELPRO DESIGN. EN AUCUN CAS,

L'INFORMATION NE PEUT ÊTRE UTILISÉE, SAUF SOUS

AUTORISATION ÉCRITE DE STELPRO DESIGN.

THE INFORMATION IN THIS DOCUMENT IS THE

PROPERTY OF STELPRO DESIGN. IN ANY CASE, THE

INFORMATION CAN'T BE USED, EXCEPT THE WRITTEN

MATÉRIEL | MATERIAL:

SCREW SCREW

WALL LENGTH

TOTAL LENGTH

1/4"

6mm

WALL

SIDE

2 9/16"

66mm

171mm

6 3/4"

1 5/16"

33mm

BOTTOM

5/8"

15mm

1/4"

6mm

WALL LENGTH

FLOOR

FRONT

51mm

3 7/16"

88mm

38mm

1 1/2"

4 5/8"

117mm

2 5/16"

59mm

1 11/16"

43mm

X:\01_PRODUITS\FAMILLES\BA\DOCUMENTATION\BA_CATALOGUE

B. SENAY

2014-12-05 / bsenay

2014-01-17

2 / 5

3rd ANGLE PROJECTION

3e ANGLE DE PROJECTION

ALUMINIUM BASEBOARD

DESCRIPTION:

CRÉÉ PAR | CREATED BY:

CRÉÉ LE | CREATED ON:

# PIÈCE | PART #:

FORMAT | SIZE:

FEUILLE | SHEET:

XX.X° = ±0.5°

XX° = ±1°

.XXX = ±.015" [ ±.38mm]

CONSENT OF STELPRO DESIGN.

MIS À JOUR | UPDATED:

EMPLACEMENT:

TOLÉRANCES SI NON-SPÉCIFIÉES | TOLERANCES IF NOT SPECIFIED

LINÉAIRE | LINEAR: ANGULAIRE | ANGULAR:

.XX = ±.03" [ ±.76mm]

L'INFORMATION CONTENUE DANS CE DOCUMENT EST

LA PROPRIÉTÉ DE STELPRO DESIGN. EN AUCUN CAS,

L'INFORMATION NE PEUT ÊTRE UTILISÉE, SAUF SOUS

AUTORISATION ÉCRITE DE STELPRO DESIGN.

THE INFORMATION IN THIS DOCUMENT IS THE

PROPERTY OF STELPRO DESIGN. IN ANY CASE, THE

INFORMATION CAN'T BE USED, EXCEPT THE WRITTEN

MATÉRIEL | MATERIAL:

SCREW SCREW

WALL LENGTH

TOTAL LENGTH

1/4"

6mm

WALL

SIDE

2 9/16"

66mm

171mm

6 3/4"

1 5/16"

33mm

BOTTOM

5/8"

15mm

1/4"

6mm

WALL LENGTH

FLOOR

FRONT

51mm

3 7/16"

88mm

38mm

1 1/2"

4 5/8"

117mm

2 5/16"

59mm

1 11/16"

43mm

X:\01_PRODUITS\FAMILLES\BA\DOCUMENTATION\BA_CATALOGUE

B. SENAY

2014-12-05 / bsenay

2014-01-17

2 / 5

3rd ANGLE PROJECTION

3e ANGLE DE PROJECTION

ALUMINIUM BASEBOARD

DESCRIPTION:

CRÉÉ PAR | CREATED BY:

CRÉÉ LE | CREATED ON:

# PIÈCE | PART #:

FORMAT | SIZE:

FEUILLE | SHEET:

XX.X° = ±0.5°

XX° = ±1°

.XXX = ±.015" [ ±.38mm]

CONSENT OF STELPRO DESIGN.

MIS À JOUR | UPDATED:

EMPLACEMENT:

TOLÉRANCES SI NON-SPÉCIFIÉES | TOLERANCES IF NOT SPECIFIED

LINÉAIRE | LINEAR: ANGULAIRE | ANGULAR:

.XX = ±.03" [ ±.76mm]

L'INFORMATION CONTENUE DANS CE DOCUMENT EST

LA PROPRIÉTÉ DE STELPRO DESIGN. EN AUCUN CAS,

L'INFORMATION NE PEUT ÊTRE UTILISÉE, SAUF SOUS

AUTORISATION ÉCRITE DE STELPRO DESIGN.

THE INFORMATION IN THIS DOCUMENT IS THE

PROPERTY OF STELPRO DESIGN. IN ANY CASE, THE

INFORMATION CAN'T BE USED, EXCEPT THE WRITTEN

MATÉRIEL | MATERIAL:

SCREW SCREW

WALL LENGTH

TOTAL LENGTH

1/4"

6mm

WALL

SIDE

2 9/16"

66mm

171mm

6 3/4"

1 5/16"

33mm

BOTTOM

5/8"

15mm

1/4"

6mm

WALL LENGTH

FLOOR

FRONT

51mm

3 7/16"

88mm

38mm

1 1/2"

4 5/8"

117mm

IMPORTANT NOTES PERTAINING TO THE INSTALLATION

N.B. Cut off power supply at circuit breaker/fuse before proceeding to the

installation.

Do not place a carpet or rug in front of the unit.

• To install a thermostat kit or relay, refer to the appropriate user guide. Grounding must be

made by connecting the ground wire (bare wire) coming from the circuit breaker panel to the

green screw located inside the junction box of the heater.

• After the baseboard heater has been tightened to the wall using the mounting holes provided,

loosen the mounting screws half a turn to allow for metal expansion.

• Do not install the baseboard below an electrical outlet

N.B. The illustration indicates the airow generated by the baseboard heater.

This air corridor must remain clear in order to allow the unit to operate efciently; to ensure

good air circulation and to avoid a re hazard.

Leave at least 3 inches (7.5 cm) between the front of the unit and objects that have a ground

clearance of at least 1 inch (2.5 cm) such as, but not limited to, beds, tables, armchairs, curtains,

etc. If these objects are located directly on the oor, leave at least 6 inches (15 cm) between

them and the front of the unit. Leave at least 6 inches (15 cm) of space between the top of the

unit and objects such as, but not limited to furniture, pillows, curtains, blankets, towels, laundry

baskets, clothing, papers, etc. Furthermore, certain materials are more sensitive to heat than

others, you must assure that these materials are located at a proper proximity where they can

handle the heat released. Do not install the baseboard under an electrical outlet.

The junction boxes volume is 52.5 po³ (860.3 cm³)

INSTALLATION

TECHNICAL DRAWINGS

SPECIFICATIONS, TECHNICAL DRAWINGS

& INSTALLATION

SPECIFICATIONS

COMMERCIAL USE RESIDENTIAL USE

DENSITY 250 W PER FEET WALL LENGTH

†

DENSITY 150 W PER FEET WALL LENGTH

†

CODE WATTS VOLTS MM IN. CODE WATTS VOLTS MM IN.

ABA0302W 300 240** 516 20 5/16 --- --- --- --- ---

ABA0502W 500 240** 719 28 5/16 ABAL0302* 300 240** 719 28 5/16

ABA0752W 750 240** 965 38 ABAL0452* 450 240** 965 38

ABA1002W 1000 240** 1217 47 7/8 ABAL0602* 600 240** 1217 47 7/8

ABA1202W 1250 240** 1466 57 11/16 ABAL0752* 750 240** 1466 57 11/16

ABA1502W 1500 240** 1694 66 11/16 ABAL0902* 900 240** 1694 66 11/16

ABA1752W 1750 240** 1941 76 3/8 ABAL1052* 1050 240** 1941 76 3/8

ABA2002W 2000 240** 2141 84 5/16 ABAL1202* 1200 240** 2141 84 5/16

ABA2252W 2250 240** 2393 94 3/16 ABAL1352* 1350 240** 2393 94 3/16

ABA2502W 2500 240** 2616 103 ABAL1502* 1500 240** 2616 103

†

To obtain the total length, add 1/2 in. (13 mm) to the wall length. See technical drawings.

**Other voltages available: 120 V, 208 V, 277 V, 347 V, 480 V and 600 V

2 5/16"

59mm

1 11/16"

43mm

X:\01_PRODUITS\FAMILLES\BA\DOCUMENTATION\BA_CATALOGUE

B. SENAY

2014-12-05 / bsenay

2014-01-17

2 / 5

3rd ANGLE PROJECTION

3e ANGLE DE PROJECTION

ALUMINIUM BASEBOARD

DESCRIPTION:

CRÉÉ PAR | CREATED BY:

CRÉÉ LE | CREATED ON:

# PIÈCE | PART #:

FORMAT | SIZE:

FEUILLE | SHEET:

XX.X° = ±0.5°

XX° = ±1°

.XXX = ±.015" [ ±.38mm]

CONSENT OF STELPRO DESIGN.

MIS À JOUR | UPDATED:

EMPLACEMENT:

TOLÉRANCES SI NON-SPÉCIFIÉES | TOLERANCES IF NOT SPECIFIED

LINÉAIRE | LINEAR: ANGULAIRE | ANGULAR:

.XX = ±.03" [ ±.76mm]

L'INFORMATION CONTENUE DANS CE DOCUMENT EST

LA PROPRIÉTÉ DE STELPRO DESIGN. EN AUCUN CAS,

L'INFORMATION NE PEUT ÊTRE UTILISÉE, SAUF SOUS

AUTORISATION ÉCRITE DE STELPRO DESIGN.

THE INFORMATION IN THIS DOCUMENT IS THE

PROPERTY OF STELPRO DESIGN. IN ANY CASE, THE

INFORMATION CAN'T BE USED, EXCEPT THE WRITTEN

MATÉRIEL | MATERIAL:

SCREW SCREW

WALL LENGTH

TOTAL LENGTH

1/4"

6mm

WALL

SIDE

2 9/16"

66mm

171mm

6 3/4"

1 5/16"

33mm

BOTTOM

5/8"

15mm

1/4"

6mm

WALL LENGTH

FLOOR

FRONT

51mm

3 7/16"

88mm

38mm

1 1/2"

4 5/8"

117mm

Please note that the width

of the units may vary

by more or less 1/16 in.

(0.15 cm).

CLEARANCE REQUIRED

Between the front of

the unit and objects

located directly on

the oor

(7.5cm)

(2.5cm)

(15cm)

(7.5cm)

(2.5cm)

(15cm)

Between the front of

the unit and objects

that have a ground

clearance of at least

1 inch (2.5 cm)