USER’S GUIDE ASGH SERIES CEILING FAN HEATER REPLACEMENT COMPONENT LIST INCLUDED US This unit complies with CSA and UL standards For further information or to consult this guide online, please visit our website at www.stelpro.
IMPORTANT INSTRUCTIONS WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
INSTALLATION SPECIFICATIONS VOLTS CEILING FAN HEATER 240/208 WATTS 4000/3000 AMPERAGE 16 COLOR RED, YELLOW OR STAINLESS STEEL WEIGHT 10 LB / 4.5 KG TECHNICAL DRAWINGS 5 1/2" 140mm 11 3/4" 298.5mm 13 3/4" 349.7mm KO 7/8'' BACK FRONT SIDE INSTALLATION This unit is designed to be installed on the surface of a finished ceiling,. This product must be installed a minimum of 8 ft (2.4 m) and a maximum of 10 ft (3.04 m) from the floor.
INSTALLATION FIGURE 1 FIGURE 2 MOUNTING BRACKET HOOK SUSPENSION SLOT INTERNAL ASSEMBLY 12 in. MIN. (305 MM) 12 in. MIN. (305 mm) COVER FIGURE3 FIGURE 4 BACK WIRING COVER 7/8 KO. -WARNINGKEEP BARE WIRE INSIDE THE BACK WIRING COVER -WARNINGUSE THIS KO FOR FINISHED CEILING RED L2 BLACK L1 GREEN FIGURE 4.5 FIGURE 5 ANTIVIBRATION OPTION HOLE. USE (2) NO.
MAINTENANCE, TROUBLESHOOTING AND REPLACEMENT COMPONENTS MAINTENANCE N.B. In order for the warranty to be valid, the unit must be cleaned regularly. Do not use cleaning products identified with these symbols: Cut off power supply at circuit breaker/fuse before cleaning the unit. Use a soft rag for dusting. When cleaning, use only a damp rag and non-abrasive dish soap. Do not use abrasive or chemical cleaners because they can damage the finishing.
LIMITED WARRANTY This limited warranty is offered by Stelpro Design Inc. (“Stelpro”) and applies to the following products made by Stelpro: ASGH model. Please read this limited warranty carefully. Subject to the terms of this warranty, Stelpro warrants its products and their components against defects in workmanship and/or materials for the following periods from the date of purchase: 5 years. This warranty applies only to the original purchaser; it is non-transferable and cannot be extended.