Full Product Manual
4
INSSOA1017
INSTALLING THE WALL MOUNT SUPPORT
(CORDED UNIT ONLY)
RECOMMENDED HEIGHT: 10 in (254 mm) FROM THE GROUND
(certied at minimum 6 in)
1. Remove the wall mount from the unit by pressing the plastic tab at
the bottom of the unit.
2. Place the wall mount at the desired height, making sure to respect
the minimum clearance from the oor.
3. Secure the mount to the wall. Make sure it is level by using screw
sets (minimum head diameter 1/4 in (6.5 mm)) and anchors
according to the wall type and the weight of the product (10 lbs).
When drilling into the wall, make sure not to damage the electrical
wiring and other hidden utilities.
N.B. The wall on which you install the unit must be straight to
ensure that the wall mount is installed perfectly at, with no
pressure. It is very important to follow this guideline, so the
support is not deformed during installation. Failing to do so
could lead to a locking mechanism malfunction.
Hanging the unit on the wall mount
1. Hang the unit on the wall mount’s upper hooks.
2. Tilt the bottom of the unit, and push it in to make sure it is locked
in place.
3. The wall-mounted unit should be installed 6 in (15 cm) from the ground.
Removing the unit from the wall mount
1. Press on the plastic tab at the bottom of the unit with a screwdriver.
2. Pull on the bottom of the unit out while pressing the tab.
3. Remove the unit from the upper hooks.