Instructions / Assembly

11
DEFINE THE FAN HEATER’S TEMPERATURE SETPOINT
The built-in thermostat has two buttons that let you choose
the temperature setpoint.
By default, the temperature setpoint is 66 °F.
1. Press or once. The temperature setpoint will ash to
indicate it can be modied.
2. Use the or buttons to dene the temperature
setpoint. If you hold one button for more than 1 second,
the temperature will change quickly.
3. When the desired temperature setpoint is reached, release
the button. The temperature will ash for 3 seconds before
being saved.
Once the temperature setpoint is saved, the ambient tem-
perature will display on the screen.
If the fan heater must start to reach the temperature setpoint,
the icon will indicate the intensity of its functioning.
If the temperature setpoint is lower or equal to 45 °F,
the icon will display to show a low setpoint.
NAVIGATING THE ADVANCED MENUS
The advanced menus make it possible to use the advanced options and congure the thermostat’s settings.
1. Acces advanced menus > Hold 3 sec. + simultaneously
2. Navigate in the menus to select the desired option > or
3. Conrm the selection > + simultaneously
4. Quit advanced menus > Hold 3 sec. + simultaneously
BUILT-IN ELECTRONIC SMART THERMOSTAT
Menu 1
Zigbee connection settings
Menu 2
Temperature display unit settings (°C or °F )
Menu 3
Nightlight mode (backlight settings)
Menu 4
Locking/Unlocking keypad settings
Menu 5
Open window detection settings
Menu 6
Type of installation settings (In-wall/Surface)
Menu 7
°STELPRO information
7.1: Fan heater version
7.2: Zigbee radio version
7.3: Date manufactured
7.4: Month manufactured
7.5: Year manufactured
7.6: Reset the thermostat to its default settings
NON-CONNECTED BUILT-IN ELECTRONIC THERMOSTAT
Menu 1
Temperature display unit settings (°C or °F )
Menu 2
Locking/Unlocking keypad
Menu 3
Type of installation settings (In-wall/Surface)
Menu 4
°STELPRO information
4.1: Fan heater version
4.2: Date manufactured
4.3: Month manufactured
4.4: Year manufactured
4.5: Reset the thermostat to its default settings