Instructions / Assembly
4
A
NOTE: The unit must not be installed
upside down nor sideway.
Install your fan heater in an unobstructed location at least
6 in. o the ground.
TIP: You can access the fan heater’s controls more easily
if you install it 12 in. o the ground.
ATTENTION: To avoid any risk of overheating, leave
a clearance of at least 36 in. in front of the fan heater
and 6 in. on either side of it.
No objects or furniture such as, but not limited to,
blankets, towels, a bed, a laundry basket, clothing,
papers, etc., should come into contact with fan
heater. Keep these items at least 36 in. away from it.
It is not designed to be used or stored in wet areas
or areas containing ammable liquids, combustible
materials or corrosive, abrasive, chemical, explosive
and ammable substances such as, but not limited
to, paint, gasoline, chlorine, sawdust and cleaning
products.
Make sure that objects or furniture near the heater can
withstand the heat it gives o.
Do not install the heater on a wall behind a door.
If a piece of furniture is nearby, make sure the fan heater will
not impede the opening of its drawers or doors.
To recess your fan heater in a wall, consider the following:
• Check the construction of your wall. There should be
at least 4 in. from the outside of your nishing and the
inside of your wall. A 2 × 4 wood stud construction with
a 1/2 in. thick nishing are considered compliant [A].
• Avoid installing in an exterior wall as this decreases the
wall’s insulation.
• Consider the location of the studs in your wall. One side
of the heater must be xed to a stud.
• Consider the location of pipes, electrical wires or other
components that may be present inside the wall and
damaged during installation.
1
WHERE TO INSTALL YOUR FAN HEATER
DRY WALL
2 × 4 STUD
TOP VIEW
6" MIN.
6" MIN.
36" MIN.
4"
MIN.
WARNING: This product must be installed by a certied electrician according to the electrical and building codes
eective in your region.