Instructions / Assembly

8
A
B
A
B
7
ATTACHING THE MECHANICAL HOUSING TO THE BACK BOX
1.
Put the mechanical housing
[A]
in the back box by
inserting it into the bottom
hooks
[B]
provided for this
purpose.
2. Pivot the mechanical housing
toward the wall.
Be careful
not to trap the wires or caps.
3. Secure with the screws set
aside in step 4.2.
8
ATTACHING THE FRONT PANEL
1. For the models with built-in thermostat, clip the connector [A] under the thermostat and pass the cable under the
hook [B] (cable strain relief).