User's Manual

Aeris Installation, Service and Troubleshooting Manual
Page | 24
Control Box Installation
• Install control box mounting bracket with hardware provided. Mounting bracket can be mounted
flush against the back of bracket, flush against top of bracket to a cross member using top
mounting holes or welded to the frame. If welding, weld the bracket to the frame before attaching
the control box to the bracket. Choose to best option for your application and a location that
protects the control box from rocks, debris, etc as much as possible. If trailer has a slider frame
make sure bracket is mounted on cross member inside the slider frame box.
• Once mounting bracket is in place, install the control box to the bracket using hardware provided.
• Mount the control box with the door facing the backend of the trailer if possible. This will help
protect it from debris from road hitting it. If this is not possible mount the control box in a location
that allows access to the door, but is as free from as many hazards as possible. Do not mount
control box near tires. Control box should be mounted as high under the trailer as possible to
keep debris from the road from hitting it and water from getting inside box if trailer is backed into
loading dock that may be holding water. See Figure 18, 19
Figure 18