User's Manual

Aeris Installation, Service and Troubleshooting Manual
Page | 39
Decal Location
• Place decals on front of trailer by the indicator light and on the inside and outside of the control
box cover. See Figure 34
.
Figure 34
Label Location
Contents
Type
Purpose
Driver warning lamp area Logo, what the warning lamp
indicates, STEMCO contact
info and any applicable IP (This
system protected by patent
numbers…other patents
pending?)
Exterior grade, subject to
pressure washing, grease,
road chemicals. Needs to
adhere to a painted aluminum
or steel surface.
Branding, instructional and IP
communication
Aeris Logo
Control box front cover
(exterior)
Aeris logo, what this is (ATIS),
IP info (same as with DWL
label above)
Exterior grade, subject to
pressure washing, grease and
road chemicals. Needs to
adhere to a clean fiberglass
or plastic surface.
Branding, IP communication
Control box diagram
front cover (interior)
Control box diagram and part
number, instructions and
STEMCO contact information.
Interior grade, black and
white, needs to adhere to
clean fiberglass or plastic
surface
Instructional and contact info
for reorder or troubleshooting.