Operation Manual

-5-
1. ON / OFF switch
2. USB-memory connection
3. Micro USB Charging slot
4. AUX-in
5. Volume UP
6. Volume DOWN
7. Play / Pause
GETTING STARTED
Congratulations on purchasing your Stereoboomm
MR300 multi room speaker.
! We recommend you to charge the device entirely before
the first use !
CHARGING THE MR300
To charge the MR300, insert the included Micro USB
cable into the Micro USB Charging slot (3) on one side
and into the included Home Charger on the other side.
When the device is running out of battery you will hear
a beep tone periodically and the MODE button (12) will
start blinking RED.
When the device is charging the MODE button (12)
will light up RED.
When the device is fully charged the MODE button (12)
will not light up anymore.
TURNING ON / OFF
You can turn the device on by using the ON / OFF
switch (1).
CONNECTING FOR THE FIRST TIME:
a. Pairing the speaker with local Wi-Fi network using WPS
Connect your smartphone to your local Wi-Fi network.
Download the Stereoboomm app in the App Store
(iOS devices) or Google Play (Android devices), run
the app and follow the steps to add your first speaker.
i. Press ‘Add Device’ button
ii. Type the password of your Wi-fi network
iii. Press the WPS button on the speaker (10)
iv. The app automatically searches for the speaker
and adds it to your network.
v. Select the preferred speaker name
b. Direct connection to the device using WPS
If there is no Wi-Fi router, you can connect directly to
the device’s Wi-Fi signal with your smartphone.
i. Turn your Stereoboomm MR300 on
ii. Go to “Settings” on your smartphone and make
sure your Wi-Fi is turned on. Your smartphone
will scan for devices, Select the Stereoboomm
MR300 and the device will be paired
automatically
iii. Open the Stereoboomm app, press the “+” to add
a speaker (If the app asks for a password, just
press “Next” )
iv. Press the WPS button (10) shortly on the
Stereoboomm MR300
v. Go to the next screen in the app, the searching will
start automatically
vi. Wait for the voice notification and press next. The
configuration will take place automatically
8. Next track
9. Previous track
10. WPS connect button
11. Wi-Fi Indication LED
12. MODE button
13. Bluetooth®
Indication LED