Owner's manual

Mark 9020D DIN SerIeS SaNItary Ball ValVeS
orDering schematic
Model Number
9020D 3-Pc Sanitary Ball Valve (DIN)
Size (DN 11866 Part A)
15 DN15
20 DN20
25 DN25
32 DN32
40 DN40
50 DN50
65 DN65
80 DN80
100 DN100
Body Material
LF CF3M 316L 1% Ferrite
1 Seat/Stem Extension
T TFM1600 Enhanced Teon (Std.)
C TFM1600 Cavity Filler Enhanced Teon
E TFM1600 with Enclosed Stem Extension
1
S TFM1600 Cavity Filler with Stem Extension
1
3 & 4 Operation
HL Lever (Std.)
NN None
P1 UT-0A-DA STD
P2 UT-0-DA STD S1 UT-0-SR STD
P3 UT-1-DA-STD S2 UT-1-SR STD
P4 UT-2-DA STD S3 UT-2-SR STD
P5 UT-2.5-DA STD S4 UT-2.5-SR STD
P6 UT-3-DA-STD S5 UT-3-SR STD
P7 UT-3.5-DA STD S6 UT-3.5-SR STD
P8 UT-4-DA STD S7 UT-4-SR STD
PF UT-4.5-DA STD SF UT-4.5-SR STD
P9 UT-5-DA STD S8 UT-5-SR STD
ZZ Non-Standard
5 & 6 Actuator Pressure
40 40 psi
60 60 psi
80 80 psi
NN N/A (no pneumatic actuator)
ZZ Non-Standard
7 & 8 Solenoid Feature Act. Type
3A 3W 8551-120VAC N4 UT-0/5 SR
3C 3W EF8551-120VAC N7 UT-0/5 SR
3J 3W 8317G35-120VAC N4 UT-0/2.5 SR
3M 3W 8321G1-120VAC N4 UT-3/5 SR
3Q 3W EF8317G35-120VAC N7 UT-0/2.5 SR
3R 3W EF8321G1-120VAC N7 UT-3/5 SR
4A 4W 8551-120VAC N4 UT-0A DA
4B 4W 8551-120VAC N4 UT-0/5 DA
4D 4W EF8551-120VAC N7 UT-0A DA
4E 4W EF8551-120VAC N7 UT0/5 DA
ZZ Non-Standard
2 Ends
A Tri-Clamp / SF1 Int. Fin. (Std.)
B Extended Tube End / SF1 Int. Fin. (Std.)
C** Tri-Clamp x Extended Tube End / SF1 Int. Fin.
D Tri-Clamp / SF4 Int. Fin.
E Extended Tube End / SF4 Int. Fin.
F** Tri-Clamp x Extended Tube End / SF4 Int. Fin.
G** Extended Tube x Tri-Clamp / SF4 Int. Fin.
H** Extended Tube x Tri-Camp / SF1 Int. Fin.
Note: SF1 nish is 20 Ra µin (.5 Ra µm) Mechanical Polish,
SF4 is 15Ra µin (.4 Ra µm) mechanical/electropolish nish
** See page 7
Model
—
Size
—
Body Mat'l 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1
Stem extension not available in DN100 size