Manual

ManualsBrandsSteriflow ManualsEquipmentMark 9030 Series

Steriﬂow by Jordan Valve

3170 Wasson Road • Cincinnati, OH 45209

513.533.5600 • 800.543.7311 • 513.871.0105 (f)

steriﬂow@richardsind.com • www.steriﬂowvalve.com

Mark 9030 Series

Sanitary Three-Way Ball Valves

The Mark 9030 Series ball valves take ASME BPE

guidelines to heart. This valve was designed from

the beginning to meet every aspect of ASME BPE.

From the materials chosen for seats and seals to the

nal marking and documentation, you can trust the

Steriow name.

Features

• Traceable Industry grade high density 316L

body, ball, stem and end caps with <3% ferrite

standard, 1% optional

• Certied TFM 1600 body seal, seat, thrust

washer, and packing material meet:

— FDA 21 CFR 177

— Final form materials also certied to meet

USP <88> Class VI (in-vivo), and USP <87>

(in-vitro) testing requirements

• Documented surface nish on all wettable com-

ponents is SF1 (20 Ra Mechanical Polish), SF4

(15Ra mechanical/eplectropolish optional)

• Ball porting has identical ID as inlet/outlet tubing

to prevent holdup

• Pressure ratings to 1000 psig @ 100°F

• Anti-blowout stem design

• Tongue & groove body seal to insure gasket

containment and precise alignment regardless of

vibration

• Inline repairable

• Tri-clamp ends, extended tube weld ends, or

both available on all sizes

• Available as manual or actuated (pneumatic/

electric) valve

• ISO 5211 actuator mounting ange direct on

body, or on stem extensions

• Optional cavity ller seats available for non-BPE

applications

• Optional drain and purge ports available

• Stem grounding standard

Sanitary Valves Mark 9030 Sanitary Ball Valves

Documentation

The following documentation is shipped with

each order:

• Steriow Unicert

— Certicate of Material compliance with

Traceable MTR's

— Certicate of Compliance to FDA and

USP <88> Class VI and USP <87>

— Certicate of Compliance to Surface

Finish

• Final Test Reports and Certicate of Ori-

gin available upon request at time of order

applications

• Biopharmaceutical, Pharmaceutical Clean

Steam, Condensate, or CIP

• Biopharmaceutical, Pharmaceutical Clean

Air and Gas

• Food and Beverage

• Fine and Specialty chemicals

• Any viscous media or other application

where inline valve cleaning or remove-for-

cleaning access is desired

Summary of content (13 pages)

PAGE 1
Sanitary Valves Mark 9030 Series Sanitary Three-Way Ball Valves The Mark 9030 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE. From the materials chosen for seats and seals to the final marking and documentation, you can trust the Steriflow name.
PAGE 2
Mark 9030 Series Sanitary Ball Valves Sample Specifications Mark 9030 Series (1/2" – 4" / DN15 – DN100) Investment Cast three-way, three piece sanitary ball valve, shall be designed, manufactured, marked, and documented per ASME BPE-2009. Body seal, seat, thrust washer, and packing shall be manufactured from FDA 21 CFR 177 acceptable TFM 1600, which has been tested in final form to meet the requirements of USP Chapter 88 Class VI (in-vivo) and USP Chapter 87 (in-vitro).
PAGE 3
Mark 9030 Series Sanitary Ball Valves Features & Benefits (1/2" through 2") Standard locking handle sleeve with body tab allows secure lockout on all models ISO 5211 actuator mounting pad Live loaded TFM 1600 packing Tongue and groove body seal for gasket containment and precise alignment of end caps, while allowing inline repairability Adjustable extra strength high grade stainless steel bolting for dependable service at elevated pressure Bore matches sanitary tube ID Tri-clamp end (shown), extended t
PAGE 4
Mark 9030 Series Sanitary Ball Valves Dimensions (1/2" through 2") 34 33 10 B/2 D 15 29 24 25 5 23 30 15-1 21 19 14 C 9 13 H 11 ØR2 Tube ends 12 F1 ART1019-1 B1 Tube ends 1 35 36 37 4 Tri-clamp end F2 B2 Tri-Clamp ends Inches Size Port 1/2" 3/4" 1" 1-1/2" 2" 0.37 0.62 0.87 1.37 1.87 Tri-Clamp Ends B1 5.27 5.89 6.38 8.50 10.12 F1 Wt, Lb 6.0 8.2 11.5 25.6 42.8 Tube Ends B2 6.45 6.83 7.28 8.37 9.71 F2 B2 163,8 173,5 184,9 212,6 246,6 F2 ØR2 0.50 0.75 1.00 1.50 2.00 Wt.
PAGE 5
Mark 9030 Series Sanitary Ball Valves Bill of Materials (1/2" through 2") Item Part Name Quantity Material 1 Body 1 ASTM A351 Gr. CF3M 4 Ball 1 ASTM A351 Gr. CF3M 5 Stem 1 SS 316L 9 End Cap 3 ASTM A351 Gr. CF3M 10 Blind Cap 1 ASTM A351 Gr.
PAGE 6
Mark 9030 Series Sanitary Ball Valves Dimensions (2-1/2" through 4") 11 33 10 11-1 28 B/2 35 37 23 36 50 E 24 35-1 19 37-1 21 30 29 15 35-2 36-137-2 15-1 ØR2 9-1 14 13 C H 12 5 Tube Ends 9 ART1020-1 1 4 Tri-Clamp End 23-1 13-1 77 F2 B1 (Tube Ends) B2 (Tri-Clamp Ends) Inches Size Port 2-1/2" 3" 4" 2.37 2.87 3.84 Tri-Clamp Ends B1 11.10 11.42 14.02 F1 Wt, Lb Tube Ends B2 10.59 12.00 14.37 F2 B2 269,0 304,8 365,0 F2 R2 2.50 3.00 4.00 Wt. Lb D C H 18.8 18.
PAGE 7
Mark 9030 Series Sanitary Ball Valves Specifications (2-1/2" through 4") Item Part Name Quantity Material 1 Body 1 ASTM A351 Gr. CF3M 4 Ball 1 ASTM A351 Gr. CF3M 5 Stem, Upper 1 SS 316L 9 End Cap 3 ASTM A351 Gr. CF3M 9-1 Bonnet, Top 1 ASTM A351 Gr. CF3M 10 Blind Cap 1 ASTM A351 Gr.
PAGE 8
Mark 9030 Series Sanitary Ball Valves Features & Benefits (2-1/2" through 4") ISO 5211 direct mount actuator pad Tongue and groove body seal for gasket containment and precise alignment of end caps while allowing inline repairability Live loaded TFM 1600 packing Tri-clamp end (shown), extended tube weld ends or mixed ends available Adjustable extra strength high grade bolting standard for dependable service at elevated pressure and vibration FDA and USP <88> (Class VI), and USP <87> TFM 1600 seats and s
PAGE 9
Mark 9030 Series Sanitary Ball Valves Actuator Mounting Dimensions ØK Strem Thread ØD2 L +03 ØD1 ØC2 (B.C.) ØC1 (B.C.) G ART1021 Inches Size NPS 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4" ISO Pattern F03 F04 F04 F05 F07 F07 F07 F10 ØC1 (B.C.) 1.42 1.65 1.65 1.97 2.76 2.76 2.76 4.02 ØD1 Hole 0.24 0.24 0.24 0.28 0.35 0.35 0.35 0.43 ISO Pattern F04 F05 F05 F07 F10 F10 F10 F12 ØC2 (B.C.) 1.65 1.97 1.97 2.76 4.02 4.02 4.02 4.92 ØD2 Hole 0.24 0.28 0.28 0.35 0.43 0.43 0.43 0.
PAGE 10
Mark 9030 Series Sanitary Ball Valves Stem Extension Dimensions 52 54 53 51 A 47 46 45 41 50 40 Size A 1/2" – 3" 4" 3.94 (100mm) 5.25 (134mm) Notes: 1. Handle parts from valve. 2. Handle length and actuator mounting dimensions same as top of valve. 3. Add stem extension height "D" above to valve heights for heights of valve with stem extension. Item Part Name Quantity Material 40 Bonnet 1 ASTM A351 Gr. CF3M 41 Stem, Extension 1 AISI 316L SS 45 Thrust Washer, Ext.
PAGE 11
Mark 9030 Series Sanitary Ball Valves Technical Information Size Operating Torque* NPS DN in-lb N.m 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4" DN15 DN20 DN25 DN40 DN50 DN65 DN80 DN100 49 104 243 408 958 55 11,8 27,5 46,1 108 1476 167 Flow Coefficient Cv Straight (Run) 4.6 12.3 25 65 126 207 310 582 90° (Branch) 2,6 7,7 15,7 41 80 132 194 345 Straight (Run) 3.7 10.6 21.
PAGE 12
Mark 9030 Series Sanitary Ball Valves Ordering Schematic Model — Size — Body Mat'l 1 2 3 3L-9030 3T-9030 Model Number 3-Way L-Port Sanitary Ball Valve 3-Way T-Port Sanitary Ball Valve 050 075 100 150 200 250 300 400 Size 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" 3" 4" 6L LF Body Material CF3M 3% Ferrite (Std.) CF3M 1% Ferrite 1 T C E S Z Seat/Stem Extension TFM1600 Enhanced Teflon (Std.
PAGE 13
Mark 9030 Series Sanitary Ball Valves MK9030/0414 Ordering Schematic — Body Mat'l 1 2 9 & 10 AA AB AC AD AE AF 0Z Limit Switch LS FMYB-5120-N4 to UT-0/3 LS FMYB-5120-N4 to UT-3.5/7 LS AMYB-5120-N7 to UT-0/3 LS AMYB-5120-N7 to UT-3.