Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
sterifl[e-mail] • www.steriflowvalve.com
Mark 96A Series
Sanitary Air Loaded Pressure Regulators
The Mark 96A is an air loaded sanitary pressure
reducing valve designed to permit the user to
change setpoints remotely via a cabinet or panel
mounted air regulator, or through a distributed
control system using an I-P transducer.
The Mark 96A is an ideal choice for automating
the SIP/CIP process when the operating setpoint
for each operation is different. With remote set-
point change capability, the valve pressure can be
changed by remotely adjusting the air pressure
loaded to the dome to the unique needs of the
current operation.
Features
• CRN Registration Number Available
• Air-loaded design significantly reduces size
and weight and can minimize offset in some
applications
• Optimized diaphragm material, surface area and
support system for unsurpassed performance and
life
• Valve sub-assembly same as time-tested MK96
design
• Permits automated CIP/SIP
• Available with extended range I-P transducer or a
SST gas regulator
Documentation
The following documentation is shipped with each
order:
• Steriow Unicert
— Traceable Material Heat Number for body and
ferrules
— Certicate of Compliance to FDA and USP
Class VI
Certicate of Surface Finish
• Final Test Reports and Certicate of Origin avail-
able upon request at time of order
applications
A wide variety of applications exist for the
MK96A in the pharmaceutical, biotech, health-
care, food & beverage and other industries
including:
• Clean Steam
• WFI
• Process Gases
• Clean Filtered Air
• CIP Chemicals
• Food/Beverage Product
• Pharmaceutical Product
• Biochemicals
Sanitary Valves Mark 96A Sanitary Pressure Regulators
CRN Registration Number Available