User Manual
Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
steriflow@richardsind.com • www.steriflowvalve.com
3L/T-2R/S33 Series
Mark 978LF Series
Sanitary Low Flow Control Valves
The Mark 978LF Sanitary Low Flow Control Valve is
designed to meet the stringent specications for low ow
sterile processes. Steriow's strict adherence to ASME
BPE, and sanitary regulations make these low ow control
valves suitable for a wide variety of liquid and gaseous
media. The Mark 978LF is ideal for use in Clean air or gas,
USP Puried Water, and CIP service in pharmaceutical and
bioprocess, and in a variety of applications in the cosmetic,
dairy, and food & beverage industries.
Whether the need is to control pressure, temperature, ow
pH, level, or other variables, the MK978LF's true charac-
terized trims and excellent repeatability makes it the right
choice for your sanitary process applications.
Features
• Maintenance-friendly – easy to perform maintenance
with simple disassembly, reassembly and steam-in-
place/clean-in-place capabilities
• Wetted parts made of 100% 316L Stainless Steel barstock
• No guiding surfaces in the uid – prevents particulate
generation
• Epoxy coated multi-spring actuators provide excellent
corrosion resistance during washdown
• Self-draining – when mounted in vertical or horizontal
orientations
• No threads in contact with service media – prevents
accumulation of contaminants
• Mechanically polished internal components – 20 Ra
(0,5 µm) nish, electropolish – standard, 8 Ra optional
• FDA and USP Class VI conformity on all process seal
materials
Documentation
The following documentation is shipped at no charge:
• Steriow Unicert: Certicate of Compliance for:
- Material, including MTR’s
- Surface Finish
- FDA/USP Class VI
• Traceability:
- Each Unicert includes individual valve serial
numbers, heat numbers and attached MTR’s directly
traceable to the valve serial number, and heat
numbers on all wetted metallic components
available Finishes
Body
• Standard: 20 Ra mechanical nish on
internal wetted surfaces (0,5 µm); ma-
chine nish on exterior (63 RMS), and
electropolished inside and out
• Optional: 20 Ra mechanical nish on
external surfaces (0,5 µm); 8 Ra nish
on internal or external surfaces (0,2 µm)
Stem
• Standard: 20 Ra mechanical nish and
electropolish (0,5 µm)
• Optional: 8 Ra mechanical nish (0,2 µm)
applications
A wide variety of applications exist for the
MK978LF in the pharmaceutical, biotech,
cosmetic, and food and beverage industries.
• Clean air or gas, USP Puried Water, and
CIP service
• Liquid ingredient addition
Sanitary Valves Mark 978LF Sanitary Control Valves