Manual

24-Pump, 128-Station Controller Chapter 8: Appendix 97
17. The application will start after a short time (Fig 16).
Fig 16
18. Press the “VersaView Enable” button.
19. “VersaView Mode Enable” message will be displayed.
20. Remove the VersaView Program Compact Flash Card from the display.
21. Press the “Reboot” button.
22. The display will reboot.
23. If an Error Screen (Fig 10) appears, Press the “OK [F7]” button to close the screen.
24. The RSView ME Station Screen with
an “Exit [F8]” button (Fig 12) will appear.
25. Press the “Exit [F8]” button to bring up the Windows CE desktop (Fig 11).
26. Insert the VersaView Firmware Upgrade Compact Flash Card into the display.