Installation Guide

USA: 1-800-STERLING (1-800-783-7546)
Mexico: 001-877-680-1310
SterlingPlumbing.com
1
1093634-09**
1093634-08**
5900 Series Bypass Shower and Bath Doors
Installation Guide
Measure distance "A." Subtract 1/4" (6 mm) from
"A" and cut the bottom track.
Center the bottom track on the ledge with the leg
to the outside. Tape in place and mark position.
Position the wall jambs over the bottom track.
Snip/file bottom edges for a snug fit.
Drill 5/16" holes and insert the anchors.
Apply sealant in the groove on the underside of
the bottom track. Secure the track to the ledge.
Measure distance "B" above the jambs. Subtract
1/32" (1 mm) from "B" and cut the top track.
Bottom Track
*Call Customer Care Center to order replacement parts.
**Finish/color code must be specified when ordering.
Retain this document for future servicing.
Record model number from box for reference.
Wall Jamb*
Towel Bar*
Inside-Panel Guide*
S11134.01
S11134.02
S11134.08
S11134.14
S11134.17
(Silver)
(Brass)
(White)
(Matted Silver)
(Nickel)
Outside Panel*
(White)
Plumb both wall jambs. Mark the screw holes.
CAUTION: Risk of injury or property damage.
Do not attempt to cut tempered glass.
IMPORTANT! Do not cut the top track the same
length as the bottom track.
Walls must be within 3/8" (1 cm) of plumb.
Cover drain with tape to avoid loss of small parts.
Follow the silicone sealant manufacturer's
instructions for application and curing time.
Installation video available at
SterlingPlumbing.com.
Wall Jamb*
Inside Panel*
100% Silicone Sealant Masking Tape
Parts Identification
Series Number Label
1048208-C
1048208-F
(Silver)
(Brass)
1077762
Anchor
1048208-C
1048208-F
(Silver)
(Brass)
Screw
#8-18 x 1-1/2"
Top Track
32 Teeth Per Inch Blade
3/16", 5/16", 5/16" Masonry
Miter Box
7
89
5
2
3
4
1/4" (6 mm)
Length = A - 1/4" (6 mm)
Bypass Shower DoorsBypass Bath Doors
Required Tools
1081001
Bumper
1052906-A
Screw
#8-32 x 3/8"
1077762
Anchor
1081001
Bumper
1080398**
Bushing
1080399
Pile Seal
1080397
Bushing
1031943**
Screw Cover
1031943**
Screw Cover
1031943**
Screw Cover
1022794**
Bracket
676200
Tape
172818
Roller
1048208-B
1048208-K
(Silver)
(Brass)
Screw #8-18 x 3/8"
172818
Roller
1052906-A
Screw
#8-32 x 3/8"
Tin Snips
1
Bottom
Groove
1
2
3
To Outside
Length = B - 1/32" (1 mm)
6
Model Number:______________
1157979-2-B
x2
A
B
1093629**
Hardware Skin Pack
Screw #8-18 x 1-1/2"
1048208-H
1048208-J
(Silver)
(Brass)
Screw
#8-18 x 3/4"
File the bottom-track edges to fit curved corners
of the shower or bath unit.
Secure both wall jambs with screws. Attach a
bumper only to the middle location.
x2
#8-18 x
1-1/2"
Screw Cover
Screw Cover