user manual

Page 110 of 118 SGB Batch Blender with Mitsubishi

Controller

box.

2. The current settings for that hopper will be

shown.

3. Make the necessary adjustments and select a new

feeder to configure if desired.

4. Hit “Done” to exit.

Alarm This screen shows the last 100 stored alarms. The log

Log can be viewed and cleared.

Programmable Features (continued)

After all selections are made:

• Keep pressing the “Done” key until the unit returns to the

Recipe menu.

Important! Programmable features should not be accessed by

inexperienced operators or inexperienced plant

personnel. Unauthorized changes may prevent the

blender from operating properly and may void part or all

of the warranty.

Call the Sterling Service Department for assistance or

for further explanation of these or any other

programmable features, which may or may not be

shown in this manual.

Select a Feeder to

Configure

Change the Alarm

Silence Delay

Enable or Disable

Retries

Enable or Disable

Alarms

Go back to Setup