User's Manual

SSE 5 BL
Assembly instructions 30
8.10. Compressed-air supply
For operating the cleaning device, a compressed-air supply is necessary.
Check compressed-air piping for correct installation and assembly.
Check fittings, length and quality of the hose connections for agreement with requirements.
The operating pressure is 5-6 bar (72-87 PSI) (system overpressure).
Check the compressed-air supplied by the plant’s supply network.
Adjust compressed-air pressure to 5-6 bar (72-87 PSI) (system overpressure).
Connect the unit to the plant’s supply network by means of a hose.
L Depressurize compressed-air supply lines which must be opened.
F Compressed air must be dewatered, dustfree and oilfree.
Install a maintenance unit if required.
Adjust pressure to a max. value of 6 bar (87 PSI) (system
overpressure).
8.11. Installing the accessories
F See chapter “Accessories”.