Datasheet

Wireless receiver
// RF Rx EN868-1W 24 VDC Order no.: 90590001
Features/Options
EnOcean standard
1-channel: potential-free relay output
1 change-over contact
Transmitter/receiver assignment by teaching mode
LEDs for indication of switching state
SMA plug-in connector for external antenna
Dimensions Technical data
Standards
EN 60947-5-1; EN 61000-6-2;
EN 61000-6-3; EN 60068-2-6;
EN 60068-2-27; EN 301 489-1;
EN 301 489-3; EN 300 220-2;
EN 300 220-3
Number of channels
1
Mounting
DIN rail mounting
Connection
terminals with CAGE CLAMP
WAGO Series 236: 0.08 … 2.5mm²
/ AWG 28-12, AWG 12: THHN,
THWN, stripping length 5 … 6mm
/ 0.22 in
Degree of protection
IP 20 to IEC/EN 60529
Inputs
1 wireless channel, max. 10
transmitters per channel
Output
1 change-over contact (relay)
Rated operating current I
e
max. 0.22A AC; 0.08A DC
Rated operating voltage U
e
24 VAC/DC -15% … +10%
I
e
/U
e
of output contacts
6A / 250 VAC; 2A / 24 VDC
Utilisation category
AC-15
U
i
250 VAC
U
imp
2.5 kV
Frequency
868.3 MHz
LED display
green LED: supply voltage,
orange LED: switching conditions
Switching frequency
approx. 9000 telegrams at
repetitions/h
Degree of pollution
2 per DIN VDE 0110
Ambient temperature
0°C … +55°C
Storage and shipping
temperature
–25°C … +85°C
Vibration resistance
NO contact 20 g, NC contact 5 g
Shock resistance
max. 100 g
External antenna
always required for optimum
sensing range
Note
Inductive loads (contactors, relays
etc.) are to be suppressed by
suitable circuitry.
Approvals
e
Errors and omissions excepted.
Arrangement of receiver and switch antenna
 Optimum Possible Unsuitable
 mounting mounting mounting
Note
The antenna must be mounted on a
metal plate of min. 250 x 250 mm size.
1 / 1
Printed:
2013-01-28
Page steute Schaltgeräte
GmbH & Co. KG
Brückenstraße 91
32584 Löhne, Germany
Telefon
Telefax
[phone]
[phone]
info
@
steute.com
www.steute.com