Datasheet

64
//
KF
Ordering details KF 1PW
1PW 1-pole change-over contact micro
switch, (reed contacts: 1S, 2S, 1W)
Series
Technical data
Foot switches
//
Series KF
Features/Options
- Thermoplastic enclosure
- Small flat design
- Without protective shield
- Max. 2 contacts
- Reed contacts for low currents from 1 mA to 1 A
- Micro switches for current load up to 5 A
- With prewired cable, length 2 m
- Available with plug-in connector
- Other cable lengths and types possible
Standards IEC/EN 60947-5-1; VDE 0660 part 200
Enclosure polyamide 66 glass-fibre reinforced, self-ex-
tinguishing
Pedal glass-fibre reinforced thermoplastic (PA 66)
Protective shield –
Termination cable AWG, length 2 m
Wire cross-section 2-/3-core: AWG 20: 0.52 mm
2
4-core: AWG 24: 0.20 mm
2
Protection class IP 65 to EN 60529
Switching system reed contacts or snap action: change-over
contact
Switching voltage 12 … 250 VAC/DC
Max. switch-on current Reed contacts: 1 A, Micro switch: 5 A
Max. power Reed contacts: 30 VA, Micro switch: 1250 VA
Max. fuse rating Micro switch: 5 A gL/gG D-fuse
Ambient temperature – 10 °C … + 60 °C
Mechanical life > 1 million operations
Approvals
d
Contact variants: Travel/contacts
Snap action Reed contacts
1 NO contact KF 1S
2 NO contacts KF 2S
1-pole change-over KF 1PW KF 1W
contact