Use and Care Manual

P.2/4
CL550T
ASSEMBLY INSTRUCTIONS
DO NOT FULLY TIGHTEN ALL HEX BOLTS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED
Step 1
:Place the Table Top (A) upside down on a piece of cloth or carpet to prevent finish
from
scratching. Attach the Table Leg (B) to each corner of the Table Top (A) by using Hex Nut (1), Lock
Washer (2), Flat Washer (3) and tighten with Open Wrench (4) provided. Do not fully tighten.
4
1
2
3
B
A
B
B
B
Step 2
: Turn the Table to upright position (
*Note:
It is recommended to use two or
more persons to turn the Table
).
Place the Table on flat surface. Fully tighten all Hex Nuts with Open Wrench (4), do
not over tighten. Assembly product is now completed.
A
B