Camilla Rectangle Dining Table Top Camilla Rectangle Dining Table Base 70"x 42"x 30" Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a minimal amount of effort. Properly caring for your furniture can help ensure that it looks great year after year. ‘Wood Furniture Maintenance: Always dust, wipe, and clean with the grain of the wood. Dust with a soft cloth. Dust will scratch the furniture surface if not removed properly.
CM420WT/CM420WB Assembly Instructions Loosen the per-assembly Bridge Boatload) from Marble Top(1). Notes: Please keep the 4 per-assembly Short Bolt (B) after loosen counterclockwise. These 4 bolts will be used for coming assembly (STEP#3). > STEP#1 5 ’ Set up Bridge E with Leg(3). Sot up Marble Bridge Board the 4 bolts on the four corner of Bridge Board (2) first. |—B put tho able | \ Top(1) onto the 1 leg Base.
Hardware Pack:# PCM420WBH NO.
PARTS FOR CM420WT/CM420WB COMPLETE HARDWARE#: PCM420WBH PCM420WBB Bridge Board PCM420WBLEV Leveler PCM420WBL Leg PRODUCT DETAILS TOP MARBLE LEG BIRCH VENEER ON MDF PRODUCT SIZE 70"x42"x30" CARTON SIZE NET WEIGHT GROSS WEIGHT CUT.
Camilla Black PU Dining Chair 20"x28"x41" Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a minimal amount of effort. Properly caring for your furniture can help ensure that it looks great year after year. Wood Furniture Maintenance: Always dust, wipe, and clean with the grain of the wood. Dust with a soft cloth. Dust will scratch the furniture surface if not removed properly.
CM420SKN Assembly Instructions Do not fully tighten bolts & screws until the entire item is completely assembled.
Steve Silver Company Dining Chairs Assembly Troubleshooting Guide The most important element of correct chair assembly is to tighten the bolts as directed. Prematurely tightening the bolts can lead to numerous issues and will lengthen the assembly time. Listed below are the most common issues in chair assembly and their easy solutions. PROBLEM: Chair is level. Cause 1: Level chairs can occur if the bolts are fully tightened before all bolts are attached.
