P.1/5 ITEM # : HYSTERIC Description : MARYLAND COUNTER CHAIR Product Size : 19.5" X 225" X42" H Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a minimum amount of effort. Properly caring for your furniture can help ensure that it looks great year after year. ‘Wood Furniture Maintenance: Always dust, wipe, and clean with the grain of the wood. Dust with a soft cloth. Dust will scratch the furniture surface if not removed properly.
HY500CC Ps ASSEMBLY INSTRUCTIONS DO NOT FULLY TIGHTEN ALL BOLTS AND SCREWS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED Step 1: Place Chair Back (A) on the floor. Attach Seat Box w/Seat Cushion (B) to Chair Back (A) by using the Flat Washer (4), Lock Washer (3), Long Bolt (1) into the holes at the rear corner block of the seat box and secure by Allen Key (6). Insert Flat Washer (4), Lock Washer (3), Short Bolt (2) into the holes at the rear bar of the seat frame. Tighter all Bolts with Allen Key (6).
PART LIST P3/5 (A) CHAIR BACK (B) SEAT BOX W/ (C) LSF (D) RSF (IPC) SEAT CUSHION FRONT LEG FRONT LEG (IPC) (1PC) (1PC) (E) FRONT (F) LSF SIDE (G) RSF SIDE STRETCHER STRETCHER STRETCHER (1PC) (1PC) (1PC) HARDWARE PACK # : PHYSICS NO.
P. 4/5 PARTS FOR HYSTERIC COMPLETE HARDWARE #: PHYSICS PHY500CCCB CHAIR BACK PHY500CCSC SEAT CUSHION PHY500CCSB \ SEAT BOX PHYSICALITY RSF FRONT LEG PHYSICISTS RSF SIDE STRETCHER L/ PHYSICALS LSF SIDE STRETCHER PHYSICALITY LSF FRONT LEG PHYSICISTS FRONT STRETCHER This fabric is not machine washable. Do not use cleaning products containing brightening agents. Fabric Content: 100% POLYESTER Allow residual shrinkage.
P. 5/5 Steve Silver Company Dining Chairs Assembly Troubleshooting Guide The most important element of correct chair assembly is to tighten the bolts as directed. Prematurely tightening the bolts can lead to numerous issues and will lengthen the assembly time. Listed below are the most common issues in chair assembly and their easy solutions. PROBLEM: Chair is level. Cause 1: Level chairs can occur if the bolts are fully tightened before all bolts are attached.
