Use and Care Manual

P.2/4

YS500TT/YS500TL

ASSEMBLY INSTRUCTIONS

DO NOT FULLY TIGHTEN ALL HEX BOLTS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED

Step 1: Place Table Top (A) upside down on a piece of cloth or carpet to prevent finish from

scratching.

Attach Table Leg (B) to the Table Top (A) by inserting Hex Bolt (1), Flat Washer (3), Lock Washer (2)

and

fully tighten with Wrench (4). Do not over tighten .

Step 2: Turn the Table to upright position. (*Note: It is recommended to use two or more people to turn the

table).

Place the Table on flat surface. Unlock the Latch underneath the Table Top (A), and pull the Table Top

(A) from both ends. Inserting the Table Leaf (C) into the middle of Table Top (A), close the Table Top

(A)

by pushing from both ends. Lock the Latch underneath the Table Top (A) to prevent from sliding.

Assembly of product is now completed.

LOCK

UNLOCK

LATCH