Warranty

stevesdoors.com
JAN 2019
Failure to provide a proper overhang; Damage caused by direct rain exposure, damage caused by extreme
temperature, either from direct sunlight and or

installation of a storm door.
In most climate conditions you need to have an overhang that extends at least half the distance of the height of
your entryway. (For example if the measurement from the base of the door to bottom of the overhand is 10 feet,

the overhang should extend 5 feet)
For Southern and Western warm climates, wet climates or if your door will receive direct sunlight during the
hottest part of the day you should have an overhang that extends the full height and up to twice the distance of

the height of your entryway.
Installing a storm door can cause extreme heat buildup from the sun or trap moisture depending on your
environment. Upon inspection, if the installation of storm door caused damage to the door that may void the
warranty.
Slight expansion or contraction of door panels, jambs and slabs due to varying environmental changes is considered
normal and not a defect.
Wood decay for any wood components that come in direct contact with soil, mildew/mold are not considered
decay.
Condensation and or damage as a result from condensation.
Structural integrity issues caused by improper installation of hardware or improper sizing of door slab
Damage or poor product performance resulting from the installation of product in a condition that exceeds product
design standard or certified specs and or does not conform to pplicable building standards.
Decorative glass, caming, grilles, clavos, and clear beveled glass panels are hand-made and may vary from one
piece to another. Slight variations in color, thickness, beveled width, distortion, bubbles and minor scratches are not
considered defects.
The exposure of knots in Knotty Alder, Knotty Pine door slabs, jambs, casing and brickmould is not considered a
defect.
STEVES & SONS
PRODUCT WARRANTY