Warranty

ManualsBrandsSteves & Sons ManualsDoors & Windows60 in. x 80 in. 3-Panel Mission Shaker White Primed Solid Core Wood Double Prehung Interior Door with Bronze Hinges

stevesdoors.com

May 2017

STEVES & SONS

PRODUCT WARRANTY

Steves & Sons Products are designed and built to provide lasting value for your home. We warrant to the original

owner, if your Steve & Sons Inc. product exhibits a defect in material or workmanship within the time periods outlined

below from the initial purchase.

Product Door Slab Glass Factory Finish Factory Applied Wood

Interior Doors 5 Years 1 Year 1 Year Frames - 1 Year

Steel Doors 10 Years Clear - 5 Years

Decorative - 10 Years

1 Year

Frames - 5 Years

Brickmould - 1 Year

Fiberglass Doors 25 Years Clear - 5 Years

Decorative - 10 Years

1 Year

Frames - 5 Years

Brickmould - 1 Year

Exterior Wood Doors 1 Year Clear - 5 Years

Decorative - 10 Years

1 Year

Frames - 5 Years

Brickmould - 1 Year

Steves & Sons, at its sole discretion, will repair, replace warranted door or refund the original purchase price.

STEVES &

SONS, INC. MAXIMUM LIABILITY IS LIMITED TO THE AMOUNT OF THE ORIGINAL PURCHASE PRICEAND

WILL NOT COVER THE COSTS OF LABOR, INSTALLATION OR FINISHING FOR ANY REPLACEMENTDOOR.

The manufacturer will not be liable for any door(s) repaired or replaced without prior written consent.

THIS

WARRANTY

LIEU

ANY

OTHER

WARRANTIES,

EXPRESSED

IMPLIED,

INCLUDING

IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. MOREOVER,

IN NO EVENT WILL STEVES AND SONS, INC. BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES.

This warranty protects your legal rights. Other rights vary from state and may apply to you. Some states

and federal laws do not allow the exclusion of implied warranties. In the event these laws apply, the length of any implied

warranty shall be one (1) year or the shortest time in excess of one year permitted under applicable law. Similarly, some

states do not allow exclusions or limitation of consequential damages and, if applicable, this limitation will not apply.

Action on any claims for warping or for photographing may be deferred, at the option of the manufacturer for a period

not to exceed 12 months from date of claim. Please see care and handling instructions for additional information.



This warranty does not cover the following circumstances and are not considered the responsibility of Steves & Sons.



Locksets or components not provided by Steves & Sons.



Normal wear and tear, and natural weathering of surfaces.



andalism, misuse, neglect, impact by foreign objects, acts of god, fire, explosion or other casualty



Problems resulting from misuse and or abuse and failure to follow care and maintenance instructions

Problems related to improper ﬁnishing of all surfaces, front, back, sides, top and

bottom of door, door unit, sidelites and/or



transom.

Natural variations in color



or texture in any ﬁnish shall not be considered a defect.

Failue to Provide Proper Overhang: Continued on next page

For additional information,

parts, warranty details,

or technical information contact Steves & Sons 1-800-617-8586

Summary of content (5 pages)

PAGE 1
STEVES & SONS PRODUCT WARRANTY Steves & Sons Products are designed and built to provide lasting value for your home. We warrant to the original owner, if your Steve & Sons Inc. product exhibits a defect in material or workmanship within the time periods outlined below from the initial purchase.
PAGE 2
STEVES & SONS PRODUCT WARRANTY Failure to provide a proper overhang; Damage caused by direct rain exposure, damage caused by extreme temperature, either from direct sunlight and or installation of a storm door.  In most climate conditions you need to have an overhang that extends at least half the distance of the height of your entryway.
PAGE 3
ADDITIONAL WARRANTY INFORMATION Photographing and Warp Tolerances Action on any claims for warping or for photographing may be deferred, at the option of the manufacturer for a period not to exceed 12 months from date of claim. Stile, rail and core show through (photographing) on flush doors shall not be considered a defect unless the faces of the door vary from a true plane in excess of 1/100 inch in any three inch span. The following warp allowances are for 1-3/4" or thicker doors.
PAGE 4
HANDLING & CARE RECOMMENDED HANDLING, JOB FINISHING AND INSTALLATION INSTRUCTIONS Inspect door upon receipt and deliver door(s) to building site after plaster cement is dry. If doors are stored at job site for more than one week, all edges should be sealed. Handle with clean gloves and do not drag doors across one another or across other surfaces. Store flat on a level surface in a dry, well ventilated building. Cover to keep clean, but allow air circulation.
PAGE 5
HANDLING & CARE It has been frequently observed that doors have warped during the early stages of their use but have straightened out after they have become fully conditioned to the moisture and temperature of the environment. This is known as the seasoning process and should embrace one full heating season. After seasoning the warp difficulty usually disappears. Faulty installation methods are common causes of warp.