Owner's Manual

Stewart Filmscreen – Balón
21
ATTACHING THE SCREEN TO THE FRAME (BLACKHAWK UST)
(CONT.)
e. Repeat this process until the first four hooks on either side of each red hook have been
laced.
IMPORTANT: By this point, you should have enough uniform tension on the screen to lace
the remaining hooks without causing misalignment of the screen and frame.
f. The final hooks at each corner should be connected to the screen by crossing the
lacings. The final S-hook on the vertical frame connects to the final grommet on the
horizontal screen edge and vice versa (see Figure 17).
Figure 17: Cross lace corner hooks
4. Attach the border trim to the screen assembly. See following page.