OWNERS MANUAL Cima FF Fixed Frame, Snap Screen Producers of Professional Projection Screens
Printed in U.S.A. ©2019 Stewart Filmscreen Corporation Stewart Filmscreen reserves the right to make changes to the product specified in this document. Sizes and specifications subject to change without notice at Manufacturer’s discretion. From time to time, this document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at: www.stewartfilmscreen.
Cima FF OWNERS MANUAL Contents To the Owner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assembling the Frame . . . . . . . . . . . . . . . . . . . . . . . . . .
TO THE OWNER Congratulations on your purchase of one of our highly versatile Cima projection screens, representing “Top of the Class” in standard commercial and residential projection screens. Please take a moment to review this manual as it will help ensure you many years of trouble-free service from your new Cima by Stewart Filmscreen product.
PREPARING THE INSTALLATION Before proceeding with the installation of this screen, take time to thoroughly read and understand these installation instructions. PREPARATION Specifications regarding the individual screen dimensions, weight, etc. are provided by the factory when the unit is ordered. Before beginning the installation: `` Make sure there is a clean surface on which to unroll the screen and assemble the frame.
ASSEMBLING THE FRAME Be sure to work in a clean area that will not damage the frame. 1. Connect the frame members by matching the labels on the ends of each member. See Figure 1. 2. Secure frame sections with the supplied bolts and allen wrench. Figure 1.
MOUNTING THE FRAME Professional mounting techniques should be used. Stewart Filmscreen can not be liable for substandard or faulty installations. To accurately position the frame, you will mount the hanging bar and temporarily hang the frame prior to attaching the screen material. On the bottom of the frame, there are magnets you can slide to line up with steel pucks you will align with wall studs. If the wall is not perfectly flat, the force of the magnet may cause the frame to bend.
MOUNTING THE FRAME (CONTINUED) HANGING BAR FRAME SCREEN Figure 2: Hanging Bar Front View Figure 3: Wall Mount Rear View HANGING BAR HANGING BAR PUCK Figure 4: Components for Wall Mounting - Side View 8 PUCK Figure 5: Hanging the Screen - Side View Stewart Filmscreen
ATTACHING THE SCREEN TO THE FRAME DO NOT perform this step UNTIL instructed to do so in the mounting section. i CAUTION `` Be careful not to touch or scratch the image surface with fingernails. `` Do not use any tools to fasten the screen to the frame. `` Do not fold or crease the screen. UNPACKING AND UNROLLING THE SCREEN The viewing side of the projection screen is rolled to the inside to protect the optical coating. The screen is rolled lengthwise. 1.
ATTACHING THE SCREEN TO THE FRAME (CONTINUED) ATTACHING THE SCREEN TO THE FRAME 1. Place the frame over the screen (snap side down). 2. Starting with the snaps on the top corners and then horizontally along the top, while lifting the frame with one hand, snap the screen into the frame. Gently allow the screen to stretch onto the snaps. Do not jerk, wrinkle or crease the screen material, as it can be damaged. Refer to Figure 7. 3.
CARING FOR AND CLEANING THE SCREEN With reasonable care, you may expect many years of dependable use of your Stewart projection screen. GENERAL MAINTENANCE The surface of your screen is delicate, so we encourage you to keep your screen clean. Special attention to these instructions should be followed when cleaning. `` Avoid getting any foreign objects on the screen, as cleaning may prove very difficult. It may not be possible to remove scratches, paint, ink, etc.
LIMITED ONE YEAR WARRANTY STEWART FILMSCREEN CORPORATION (Stewart) warrants all products to the original purchaser only. Stewart products are guaranteed to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser or eighteen (18) months from date of manufacture, as defined in the serial number.
MAINTENANCE NOTES Cima FF 13
xxx www.stewartfilmscreen.com 1161 W. Sepulveda Blvd., Torrance CA 90502 USA l 800.762.4999 l Tel: 310.784.5300 l Fax: 310.326.6870 l Email: request@stewartfilmscreen.com ©2019 Stewart Filmscreen. Specifications are subject to change without notice.