Owner's Manual

12
Stewart Filmscreen – WallScreen 2.5
WALL BOARD MOUNT
NOTE: Professional mounting techniques should be used. Stewart Filmscreen cannot
be liable for substandard or faulty installations. Failure to comply with the instructions
and guidance contained in this manual may result in voiding your warranty.
1. Lay assembled frame face
down on a clean surface.
2.
Fit wall boards to the outside of
the brackets already attached
to the frame.
3.
Bolt wall boards to brackets
using the supplied 3/4” hex
head bolts (see Figure 9).
Note: Depending on the size of
the screen, the number of wall
boards may vary. Temporary
attachment of the wall boards
to the frame for the purpose of
positioning the frame and
brackets on the wall.
4.
Without the screen material
attached, position the frame
and wall boards on the wall
(see Figure 10).
5.
Make sure the unit is level and
plumb. You may need to use
shims between the boards and
the wall to achieve vertical
plumb.
6.
Align the wall board holes with
wall studs, mark and drill holes
in the wall that align with the
wall board holes.
Figure 9: Temporarily Attaching
Wall boards to the Frame
Figure 10: Positioning the Frame and
Wall Boards to the Wall