Owner's Manual

15
Stewart Filmscreen – WallScreen 2.5
APERTURE MOUNT
NOTE: Professional mounting techniques
should be used. Stewart Filmscreen cannot be
liable for substandard or faulty installations.
Failure to comply with the instructions and
guidance contained in this manual may result
in voiding your warranty.
The aperture mount allows you to install the
screen into an opening in a wall or wall unit.
Access to the back of the screen is required to
install the attachment hardware.
1. Prepare the aperture.
2.
Attach the screen to the frame (see pages 16-
17).
3.
Carefully insert the frame (with the screen
already attached) into the aperture. Take care
so that you do not damage the screen.
4.
Install the frame/screen assembly into the
aperture using the attached mounting brackets
and appropriate fasteners (see Figure 14).
⚠ CAUTION
Be careful not to touch or scratch the viewing surface.
Figure 14: Installing Frame/Screen
Assembly – Rear View, Close-up