Owner's Manual

5
Stewart Filmscreen – WallScreen 2.5
ABOUT WALLSCREEN 2.5
Your WallScreen 2.5 fixed frame supports virtually all projection applications. The Velux
finish is designed to absorb any projector overscan. The WallScreen 2.5 features angled
corners and a beveled edge that brings the image area closer to the front of the frame.
The WallScreen 2.5 features snaps and brackets that move on the frame to allow for
adjustments. Rear projection is available as an option. The EZ mount is the standard mount.
Other options include the Wall Board Mount, the Eye Bolt Mount (Hanging), and Aperture
Mount.
USING THIS MANUAL FOR INSTALLATION
The WallScreen 2.5 screen is designed for easy installation. There are no user-serviceable
parts contained within the unit.
VOIDING YOUR WARRANTY
NOTE: Failure to comply with the instructions and guidance contained in this manual
may result in voiding your warranty.
For the instructions related to your specific mount type, refer to the appropriate page:
‣ EZ Mount (page 9)
‣ Wall Board Mount (page 12)
‣ Eye Bolt Mount (Hanging) (page 14)
‣ Aperture Mount (page 15)
At the designated point in the installation, you will need to refer to the general instructions for:
Attaching the Screen to the Frame (page 16-17).