Owner's Manual

10
Stewart Filmscreen – WallScreen 2.5
EZ MOUNT (CONTINUED)
9. Reposition the frame and the slide, and then secure the magnets so they align with the steel
pucks mounted on the wall.
10.
Remove the frame. Follow the steps for attaching the screen to the frame (pages 16-17).
However, do not attach the snaps of the bottom row at this moment.
11.
Lift the frame with the bottom row of the screen unattached, and attach the back brace to
the frame between two snaps near the center with the provided screws or other appropriate
fastener (See figure 5)
12.
Attach the screen snaps of the bottom row (page 16).
13.
Your WallScreen is now ready to hang in its final position (see Figures 6-8).
Figure 5: Attaching Back Brace to the
Frame
Figure 3: EZ Mount Front View
Figure 4: Screen Rear View
EZ Mount