Owner's Manual

14
Stewart Filmscreen – WallScreen 2.5
EYE BOLT MOUNT (HANGING)
NOTE: Professional mounting techniques should be used. Stewart Filmscreen cannot
be liable for substandard or faulty installations. Failure to comply with the instructions
and guidance contained in this manual may result in voiding your warranty.
1. Attach the screen to the frame (see pages 16-17).
2. Use the Eye Bolt Mount to suspend the screen. Eye bolts are already secured to the frame
making your WallScreen ready for installation to an appropriate surface (see Figure 13).
Note: On some custom sized frames the use of additional “back support braces” is required.
These vertical support braces assure parallel top and bottom frame member alignment once the
screen has been attached to the frame. If back braces are included, do not install the
screen/frame without required back braces.
⚠ CAUTION
‣ Be careful not to touch or scratch the viewing surface.
‣ A false ceiling is not intended to support the weight of a WallScreen. Contact a Stewart
representative for more information.
Figure 13: Eye Bolts Mounted Securely to the
Frame