Owner's Manual

7
Stewart Filmscreen – WallScreen 2.5
PREPARING THE INSTALLATION (CONTINUED)
Note: Bolts and other fasteners for the screen are standard gauge and standard sizes used
in the U.S., regardless of the installation country. For this reason, sizes are in inches rather
than metric measurements.
UNPACKING
Be sure to unpack carefully in a clean area. Use special care when handling the screen so that
it does not become soiled or damaged. If you plan to repack your screen and hardware for
transportation to another location, you may wish to photograph or make a note of how it was
packed. Retain the packing material for future use, if desired.
⚠ CAUTION
Do not stand on the screen tube or store it on its end. This will cause screen damage. If
you are not planning to install the screen immediately, make sure it remains horizontal
during storage.