User Manual

Applications
RFI-9256 Radio Modem User Manual Page 45 of 96
Route Type RTU Address Radio Address
Single Route 71 2000:01
Mapped Route 55-56 3001:00
Table 12: Master SCADA routing table
There are two routes used in this network. The first route is a single route that links RTU address 71 to radio
address 2000:01. All traffic with an RTU destination of 71 will be routed to the auxiliary port of the slave
with address 2000 (slave 1 in the above diagram).
The second route is a mapped route that links RTU addresses 55 and 56 to radio addresses 3001:00 to
3002:00. This means that traffic destined for an RTU with an address in the range 55-56 will be routed to the
main port of the slave with address 3001 + RTU Address – 55.
The slave units would all have the same routing table, shown in Table 13.
Route Type RTU Address Radio Address
Default Route N/A 1000:00
Table 13: Slave SCADA routing table