User's Manual

USING INTERNAL MENU COMMANDS

©©

234839, Revision 2.2

(L) Protocol Port Selection (Link/Port Protocol Menu)

The following menus allow the user to select common protocols to be used between RS-232 devices

connected to the radio modems.

*** Protocol Port Selection ***

Main Port: Protocol Type: Point to Point

Aux Port: Protocol Type: Point to Point

(M) Main Port

(A) Aux Port

(Esc) Previous Menu

Enter Choice:

Figure 6-10 Protocol Port Selection

(M) Main Port

– Select to change the protocol on the Main Port.

(A) Aux Port – Select

to change the protocol on the Auxiliary Port.

After the port has been selected the user then enters the Link/Port Protocol Menu (Figure 6-11). From

this menu the user can assign a new protocol to the port that has been selected and configure it using the

two submenus available.

*** Link/Port Protocol Menu ***

Main Port: Protocol Type: Point to Point

(P) Protocol Selection Menu

(Esc) Previous Menu

Enter Choice:

Figure 6-11 Link/Port Protocol Menu

Figure 6-9 Example Use of Directional Bias