User's Manual

USING INTERNAL MENU COMMANDS
©
©©
© RF Innovations Pty Ltd, 1998 Page: 30
234839, Revision 2.2
could be
23
or more the Radios Rx address would be
1000
. When the decoder sees RTU address
21
it
subtracts it from the base RTU that would leave
1
this result is added to the Rx address would be Rx
address
1001
(RTU 21).
Range Route -
This route mode routes any RTU address between a range of addresses to a single
Radio Rx address. It requests a start address for the range of RTU address, an end address and an Rx
address of the destination radio.
Figure 6-15 Relationship between Rx and RTU