User's Manual

USING INTERNAL MENU COMMANDS

©©

234839, Revision 2.2

-------------------------- STATUS --------------------------

Unit Name:

Serial Number: 010141CF1297

Manufactured Date: 21/02/2000

RFI-9256

Version 1.22 Rev.A Australia

Build Date: Oct 20 2000 Time: 11:59:59

Unit is a MASTER

Point to Multipoint Dialup Connection

Network Address = 32

Rx Address = 20

Hopping Pattern = 19

Power setting = 30 dBm

RSSI trigger level = -60

Frame Time = 35 milliseconds

Max Tx bytes per frame = 221

Bias is Disabled

UNLOCKED

RSSI = 0 Noise floor = -137

Temperature = 42.5c

CRC32 = 715FA77A of size 127892 bytes

CRC check Correct

Press Any Key to return

Figure 6-34 Unit Status Display

(T) Test Indicator LEDs

Selecting this function starts a test of the front panel LEDs. This is a visual test and the LEDs must be

observed while this test is in progress. It simply turns the LEDs on and off operating using all the

colours in a predefined sequence.

(N) Show channel signal/noise

When this function is selected, a table in Figure 6-35 is displayed showing the signal and noise levels for

each channel used within that hopping pattern. The following table is an example of what is displayed.

The reading on the signal row is the RSSI (received signal strength indicator in dBm) of the radio for

each channel the unit operates on. If a ‘??’ is displayed as the signal value then there wasn’t a recent

sample for that channel.