User's Manual

USING INTERNAL MENU COMMANDS
©
©©
© RF Innovations Pty Ltd, 1998 Page: 48
234839, Revision 2.2
Idx Timer Handle Param Task Name
0 0 100 0 Serial Flow MAIN
1 10 101 0 Front Button
2 10 102 0 Front Panel
3 10 103 0 Modem Ctrl
4 10 104 0 AltComm Status
5 5 105 0 Hayes Modem MAIN
6 5 106 1 Hayes Modem AUX
7 10 107 0 Online Status
8 1 108 0 Link Layer
9 10 117 0 Console
10 12 118 0 Main Menu
---------------------------------------
Press Any Key to return
Figure 6-36 Tasks Display
(3) Display Links
This display is for diagnostics only.
The Links display shows the current status of communication connections to the Radio. An example of
the Dialup Link display and Point-to-Point Link display is in Figure 6-37.
Idx LocSrc LocExt DestSrc DestExt DestAddr State Link Name
0 0 0 0 0 1000 5 MAIN Dialup
Idx LocSrc DestSrc DestAddr State Link Name
1 1 1 1001 3 AUX PtoP
-----------------------------------------------------------
Press Any Key to return
Figure 6-37 Links Display
Idx is the Index Number is used internally but indicates the number of links.
LocSrc is the local port number that is the source/destination for the data.
LocExt is the extension that has been dial if a remote has dialed this unit.
DestSrc is the remote port that is the source/destination for the data.
DestExt is the extension that this unit has dialed.
DestAddr is the remote unit address.
State is the state of the link (i.e. idle, active).
Link Name is the name assigned to the link. It reflects the mode of operation for that link.
The source/destination ports are one of three ports, the main, auxiliary or the virtual port. The virtual port
is an internal port used by the radio to communicate through the menus.