User's Manual

USING INTERNAL MENU COMMANDS
©
©©
© RF Innovations Pty Ltd, 1998 Page: 49
234839, Revision 2.2
(F) Fault log menu
The following menu in Figure 6-38 shows the logging menu which is for general debugging information
used only by RFI or to obtain feedback from a customer.
*** Log Manager Menu ***
Log Level = Debug Information
(V) View Log
(L) Set Logging Level
(C) Clear Log
(Esc) Previous Menu
Enter Choice:
Figure 6-38 Fault Log Menu
(V) View Log
Used to actually view the debugging information supplied by the radio modem.
(C) Clear Log
Used to clear the logging file so new data can be logged for debugging purposes.
(L) SET LOGGING LEVEL
Selected to change the type of information logged by the radio modem for display when using the (V)
command as shown below in Figure 6-39.
*** Log Level Menu ***
Log Level = Debug Information
(0) Errors Only
(1) Warnings and Errors
(2) Status Information
(3) General Information
(4) Debug Information
(Esc) Previous Menu
Enter Choice:
Figure 6-39 Log Level Menu
(1) Statistics Menu
As the Modem operates in its normal modes it builds up a picture of how well it is operating in any
given environment and keeps track of the statistics for that operation. The user may access these statistics