User's Manual

HAYES AT COMPATIBLE COMMAND SET
©
©©
© RF Innovations Pty Ltd, 1998 Page: 64
234839, Revision 2.2
ATS48 Frame Bias
Range Description
0Disable
1Outgoing/Upload
2 Incoming/Download
Set the Frame Bias parameter.
Default: 0 (Disabled)
ATS50 Network Address
Range: 0-63 Default: 32
Set the Network Address parameter.
ATS51 Unit Rx address
Range: 0-9999 Default: 20
Set Unit Local Rx Address parameter (Phone number).
ATS52 Unit Tx address
Range: 0-9999 Default: 20
Set Remote Tx Address parameter (Phone number). This is only applicable if the unit is switched
to Point-to-Point mode.
ATS60 Set Logging Level
Range Description
0Errors Only
1 Warnings and Errors
2 Status Information
3 General Information
4 Debug Information
Set Fault/Debug logging level.
Default: 3