User's Manual

HAYES AT COMPATIBLE COMMAND SET
©
©©
© RF Innovations Pty Ltd, 1998 Page: 65
234839, Revision 2.2
ATS61 Set UNIX Date/Time
Range: 0-2147483647 Default: 0
Set the time in seconds since 1970
ATS62 Set System/Log Timer
Range: 0-86400000 Default: 0
ATS70 Set Port Protocol Type
Range Description
0Disabled
1 Point-to-Point
2Broadcast
3 Hayes Dialup
Default: 3
ATS80 Get Local Auxiliary I/O Hex data
Range: 0x00-0xFF (0-255) Default: 0x00
Get/Set the 8 bit auxiliary I/O port
ATS81 Get Remote Auxiliary I/O Hex data
Range: 0x00-0xFF (0-255) Default: n/a
Get/Set the bit direction of the 8 bit auxiliary I/O port of the remote radio. You must already be
connected to a remote radio either by dialing and returning to local command mode or by having
the opposite port having already established a connection to a remote by dialing or in a point-to-
point mode.
ATS82 Get Auxiliary I/O Direction Mask
Range: 0x00-0xFF (0-255) Default: 0x00
Get/Set the bit direction of the 8-bit auxiliary I/O port on the radio that you are connected to.