User's Manual

HAYES AT COMPATIBLE COMMAND SET
©
©©
© RF Innovations Pty Ltd, 1998 Page: 67
234839, Revision 2.2
ATS91 Set RTS control
Range Description
0 ONLINE controls RTS
1 NETWORK LINK controls RTS
2 CARRIER DETECT controls RTS
3 Remote DSR controls RTS
4 Local DSR controls RTS
5 Remote CTS controls RTS
6 Local CTS controls RTS
7RTS Always ON
8RTS Always OFF
9 RTS disabled
Set the RTS Control of a Serial Port.
Default: 0
ATS100 Set Port baud rate
Range: 300,600,1200,2400,4800,9600,19200,38400,57600,115200 Default: 19200
Set the Baud Rate of the Main Serial Port.
Must be used in conjunction with the AT&W1 command.
ATS101 Set Port parity
Range Description
0 No Parity (default).
1 Odd Parity
2Even Parity
Set the Parity of the Main Serial Port.
Must be used in conjunction with the AT&W1 command.
Default: 0
ATS102 Set Port data bits
Range Description
7 Seven Bit Data
8 Eight Bit Data