User's Manual

HAYES AT COMPATIBLE COMMAND SET
©
©©
© RF Innovations Pty Ltd, 1998 Page: 70
234839, Revision 2.2
Command Description L &W Command Description L &W
? Help / Menu
!
&F
Hayes

only defaults
E0 Echo OFF
!
&F1 Set Factory defaults
E1 Echo ON
!
!!
!
&G0 Multi modem ports
L0 Lowest speaker volume &G1 Exclusive use by this port
L1 Low speaker volume &G2 Priority use of this port
L2 Mid speaker volume &K0 No flow control
L3 Highest speaker volume &K3 Hardware RTS/CTS flow control
M0 Speaker off &K4 Software XON/XOFF flow control
M1 Speaker on when connecting &L0 Set Modem to SLAVE mode
M2 Speaker on &L1 Set Modem to MASTER mode
Q0 Response ON
!
!!
!
&M0 Set Ports to Point to Point
!
Q1 Response OFF
!
&M1 Set Ports to Multipoint Dialup
!
!!
!
V0 Numeric response codes
!
&M2 Back To Back Repeater
!
V1 Verbal response codes
!
!!
!
&M2 Dialup Repeater
!
X0 Set to basic response codes
!
!!
!
&S0 Sync Mode Off
W0 Fast Response &S1 Sync Mode - Input (Follow)
W1 Delayed Connect Response &S2 Sync Mode - Output
X4 Set to extended response codes
!
&S3 Sync Mode - Repeater
Z Initialise (power on reset) &T8 Warm Start - Reset
!
&A0 Auxiliary I/O Disable &T9 Cold Start - Reset
!
&A1 Auxiliary I/O Enable &V View current profile
!
&A2 Auxiliary I/O Follows Remote &V0
View all basic Hayes register
information
!
&C0 DCD always on &V1
View all ‘I’ Register profile
information
!
&C1 DCD follows Online &V2
View all ‘S’ register profile
information
!
&C2 DCD Follows remote DSR &V8 View Current Links
!
&D0 Ignore DTR
!
&V9 View Logging
!
&D1 Go local on DTR low
!
&W Write All Configuration
!
&D2
Hang-up on DTR high to low transition
(dropped).
!
!!
!
&W1 Submit Serial Port Configuration.
!
&D3 Hang-up if DTR low
!
Table 7-1General Commands
Table 7-1 Notes
!
in L Command must be last on the command line
!
in &w &w must follow for changes to take effect
Bold Defaults
Gray For Compatibility only (no function)