User's Manual

HAYES AT COMPATIBLE COMMAND SET
©
©©
© RF Innovations Pty Ltd, 1998 Page: 72
234839, Revision 2.2
Command Description S
%20 Set Unit Name
×
%22 Set Menu Password
×
%62 Set RTC Date/Time (HH:MM:SS)
×
Table 7-5 ‘%’ Register Commands
Num Verbal Description
0 OK Command accepted
1 CONNECT Connection established
2 RING Incoming call detected
3NO
CARRIER
Carrier not detected
4 ERROR Command error
7 BUSY The dialed number or extension is
busy
8 NO ANSWER Extension not supported
255 FAULT Protocol or other error
Table 7-6 Response Codes
Table 7-5 Notes
The % register commands are single line commands and cannot be
concatenated together with other commands.