User's Manual

ESTABLISHING COMMUNICATION LINKS

©©

234839, Revision 2.2

Point to Multipoint (+Repeater)

In Figure 9-6 a setup is shown where a master routinely calls a number of slaves at different times. The

master is communicating with a transceiver designated as a repeater/slave that is connected to a remote

instrument in the field. Since this instrument is placed in an elevated location, the transceiver may also be

used as a repeater when it is not used as a slave. At any time the master may call any of the slaves, establish a

connection, and retrieve and send data. Note, point to multi-point (Dialup) is the only mode available when

the radio is configured (using the menu) as a repeater.

Figure 9-6 Point to Multipoint System with Repeaters - Logical View