User Manual

CAUTION
Rex Plus
®
II is designed to detect a moving object though a wall or door and
designed to be placed in an area hidden from an intruder or guest. The unit has
reduced sensitivity at the back of the unit. If sensing movement from behind, try to
change the position of Rex Plus
®
II slightly to reduce any unwanted detections. The
sensitivity control can also be reduced to minimum to detect in the desired direction
while reducing the undesired detections. Moving objects in addition to people can
also be detected, including vehicles, animals, trees and shrubs blowing in strong
winds and dwelling movements during strong storms.
Detection Eciency
Rex Plus
®
II radar waves can detect through a variety of materials with maximum
efficiency. The following chart serves as a guide.
Fiberglass or Plastic Full Detection
Wooden Doors Slight Reduction
Glass Slight Reduction
Curtain Material Slight Reduction
Paper Cartons/Cardboard Slight Reduction
Plaster/Drywall Walls Medium Reduction
Metal (Steel doors, aluminum or steel siding) Heavy Reduction
MATERIAL EFFECT ON RANGE
SPECIFICATIONS
(supplied)
External Output
90 days maximum with alkaline batteries,
depending on the number of activations
Detection Range 26 ft. maximum, reduced through obstructions
Detection Angle 150 degrees typical
Power Requirements 120 VAC Plug-in Adapter, 12VDC 0.5A
Battery (optional for portable operation) 6 Alkaline “C” batteries
Detector Operating Frequency 2.4 GHz
Power detecting standby 0.15W
Power Barking 6 W Peak
Battery Life
(not supplied)
3.5mm mono jack, supply 75mA at 12VDC for
1 second
· can be used with optional STI Lamp Controller
STI-30104
Weight 2 lbs., including AC adaptor, without batteries
Size 8 ½ in. tall, 4 ½ in. wide, 5 ½ in. deep